Blog6 Ways to detect Hidden Water Leaks

30/08/2021by admin
https://www.prattplumbers.com.au/wp-content/uploads/2021/08/6-Ways-to-detect-Hidden-Water-Leaks-1280x720.jpg

Early detection of water leaks can save you money and prevent disaster. There are some signs of a leak, and you should contact Plumbing services Perth.

1) Check the metre for your water.

One of the best ways to tell if you leak is to check your water metre. To do so, all the water in your home needs to be switched off. Turn off all taps and make sure the washing machine and dishwasher do not work. Then look at the metre and see if it changes. If so, you are probably leaked rapidly. Wait two hours and check again if the metre does not change immediately. You may have a slower leak if it’s changed even when there’s no water. The leak might be anywhere, or even underground, after the metre. Recall that the owner is responsible for all plumbing after the metre.

2) Watch your usage

Check your winter water to see if there is a leak in your home. If a family of four uses over 12000 gallons of water per month somewhere in your plumbing system, there is probably a severe leakage problem.

3) Monitor your bill

A leak is likely to be the fault of you if your bill continues to grow, but your water use habits have not changed. Collect and compare a few facts from recent months to see if there is a continuous increase. Your bill for water is supposed to remain within a monthly range. Remember that you may have underground some of your pipes. In this part of your system, you may never detect leaks, but you will always pay for them. It’s best to perform a thorough check on all pipes by a professional plumber. Immediate professional attention is needed if the floor is warm (with a line under its slab) or water sounds run away.

4) Get some food colouring

Toilets can account for 30% of your water consumption, so you have to check that they work correctly. Add a few drops of food to the toilet tank and wait 10 minutes to check for leaks. When the colour comes up in the bowl, you have a leak that allows water to drain from the tank without the bowl being flushed.

5) Check exterior use

Leaks don’t just happen inside the home, unlike if you are looking for Gas plumbing services; they happen outside as well. Check your outside faucets for water leakage by connecting a garden hose; If water leaks through the connection while the hose is running, replace the rubber hose gasket and check that all links are tight. Consider calling a professional once a year to check your irrigation system if you have one. A system with even a tiny leak could be wasting 6,300 gallons of water per month.

6) Use common sense

Practice regularly checking the back of cabinets and under sinks for signs of mould or unpleasant odours that could indicate a leak – immediate attention could save you thousands of dollars in repairs. Also, consider having your home inspected annually by a professional plumber to check for leaks or potential problems.

Be especially vigilant if your household is over 25 years old; Your plumbing system may be in decline for its life expectancy. Inspect all accessible connections on the water heater, pumps, washer hoses, and valves for rust or discolouration – clear signs of a slow leak.

If you suspect a leak in any part of your plumbing system, call a professional for a repair as soon as possible. Don’t wait until it gets worse and you’re in your hands with the absolute mess!

Contact us now to get quote

Contact us now to get quote

Copyright © Pratt Plumbers 2022. All rights reserved.

Created by: Dotcol Consulting