BlogDealing with a burst pipe

06/02/2020by admin0
https://www.prattplumbers.com.au/wp-content/uploads/2020/02/plumbing-840835_1280-1280x853.jpg

A burst pipe at the home can cause some severe damage. Keep on top of things with our useful hints below. A burst pipe is classed as a water emergency — it can cause serious harm to your house’s structure and electrical wiring. It is very important to do it after you discover that a burst pipe.

Managing a burst pipe

If you have got a burst pipe issue, follow these instructions

  1. Turn off the water source

Now you should find that under the Kitchen sink or in which the service pipe enters your residence.

  1. Drain the system

Then drain the machine by turning on all your cold taps and Flushing your bathrooms.

  1. If it’s a heating tube that’s burst — Turn the water off heating systems

Switch off the central heating, immersion heater and some other water heating methods. When the central heating utilizes solid fuel, let’s die out. As soon as your water heating has shut down, turn on the hot taps to help clog the machine.

  1. Turn off the electrics

If water from the burst pipe is leaking close your electrics Or electric appliances, switch off the mains immediately. If the mains switch is wet, don’t touch it or you could risk electrocution! Call a qualified electrician instantly.

  1. Be safe

If you see the flow quickly you can catch dripping water in buckets. However, if water has been leaking through for some time and the ceilings have been bulging, rooms may not be safe to enter. If the ceiling is more bulging and you are convinced that there’s not any threat, punch a small hole in it using a screwdriver to allow the water drain.

  1. Fix the Issue

If you are at all unsure about fixing a burst pipe by yourself, call in an expert plumber to repair the issue. And in case you have a home emergency policy that insures you for burst pipes, then get in contact with your insurance company as soon as you possibly can.

If you are a specialist DIY-er you Might Want to try the job yourself. In the event, the burst pipe is leaking out of a screw fitting, then see whether you’re able to tighten it. If the pipe is split or diluted using a nail then it will need to be repaired. Buy a DIY kit that replaces the broken part with a part of the new pipe. Full instructions will be contained.

Avoid your pipes from exploding again

Low temperatures result in water from your pipes freezing which can cause your pipes to burst. You need to be able to prevent future burst plumbing by taking the next measures to prevent your plumbing from freezing.

Pratt plumber is your burst water pipe plumber, we deal with many plumbing problems.  We provide quality plumbing services at an affordable cost.

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact us now to get quote

Contact us now to get quote

Copyright © Pratt Plumbers 2022. All rights reserved.

Created by: Dotcol Consulting